ThermaQ ST Electric

ThermaQ
ST Electric

Electric only thermal store unit.

The ThermaQ ST Electric is powered by two 3kW immersion heaters which makes this an ideal product for E7, E10 tariffs and properties where gas is not available. These products still allow for pressurised hot water and are a great choice in dwellings such as flats, where the choice of heat sources can be limited.

In using Immersion Heaters as the primary heat source it is possible to utilize the benefits of off peak electricity which feed the store during the night. Thick high efficiency insulation maintains the store temperatures until hot water is required which minimizes running costs, whilst still allowing for the top immersion heater to be used through the day as a boost if necessary. The immersion heaters supplied are low watt density & designed to operate at a low noise level as not to disturb the home when the unit is heating up at night.

  • Pressure Reducing Valve (Loose)
  • Mixing Valve
  • 2L Expansion Vessel (Stainless Steel)
  • 22mm Isolating Valve
  • Ball Valve (Combinations Only)
  • Float (Combinations Only)
  • Immersion Heater(s)
  • All Thermal Stores ERP rated ‘D’

ThermaQ ST Electric

Type Code Capacity
(L)
Cylinder
Height
(F)
Diameter
(mm)
Cold
Inlet /
Drain
Off
(A)
Immersion
(B)
Immersion
(C)
Coil
(Cold)
(D)
Coil
(Hot)
(E)
Cylinder CTZ0006 160 1200 450 100 150 410 590 990
Cylinder CTZ0007 180 1300 450 100 150 410 590 990
Cylinder CTZ0008 210 1500 450 100 150 410 590 990
Cylinder CTZ0009 250 1800 450 100 150 410 590 990
Cylinder CTZ0010 300 1650 500 100 150 410 590 990
Combi CTZ0011 160 1450 450 100 150 410 590 990
Combi CTZ0012 180 1600 450 100 150 410 590 990
Combi CTZ0013 210 1850 450 100 150 410 590 990
Combi CTZ0014 250 1995 450 100 150 410 590 990
Combi CTZ0015 300 1860 500 100 150 410 590 990