ThermaQ Designer Tap

ThermaQ Designer Tap


Hot Water on Demand

Join the handwashing revolution, with our non-boiling 50⁰C hot water designer tap, designed with the electric heater built-in.

Convenient, instant hot water. the new ThermaQ Designer tap is the self-contained installable future of hand washing. Finished in a clean steel look, the tap provides instant hot water on demand in virtually any location that has access to mains water and electricity – simply mount the tap in the sink or basin, connect the cold mains and have an electrician make a safe connection to a power supply. Easy to use without instructions, the flagship of our new heating range works like a regular tap, but allows for hot water access where it wasn’t possible before.

  • Point of use application so can be located almost anywhere.
  • Compact, stylish unit with built in heating element.
  • Easy installation using supplied power cord.
  • Built-in physical electricity guard.
  • Overheat protection, heating will cut-off automatically at 50⁰C.
  • Manual water and power control switch & automatic mechanical water pressure switch with double control mode to completely avoid dry heating.
  • Simple operation to deliver hot and cold water.
  • Rotatable 360⁰ nozzle.
  • Between 1-2L/min dependent on incoming mains and required temperatures.

Specification


Product Code EWH0001
Power (kW) 3.3
Flow rate (Up to per min.) 1-2L
Material HIGH QUALITY STAINLESS STEEL
Voltage (V) 220-240
Rated Current (A) 13.6
Rated Frequency 50-60Hz
Recommended Cable Size 2.5mm2
Overheat Protection 70⁰C
Thermal Cutout 50⁰C
IP Rating IP25
Working Pressure 0.4-4 bar
Water Connections G 1/2"
Dimensions (mm) 198x160x98